Posted in

How to sharpen a drill bit for a drilling machine?

Hey everyone, it’s Jake here from your go-to drilling machine supplier — and if you’ve ever wasted time on a dull drill bit that skips across metal, snaps mid-hole, or leaves a ragged edge, you know how frustrating it is. I’ve lost count of how many times our customers call in saying their new drilling machine works like a dream, but their bits are the real problem. Today, I’m breaking down exactly how to sharpen a drill bit at home (without needing fancy lab gear) so your machine performs like it should — plus, I’ll throw in a few pro tips from our shop that’ve saved our regulars hundreds in replacement bits. Drilling Machine

First, let’s get one thing straight: a dull drill bit isn’t just “a little off.” If your drill bit’s cutting edges aren’t angled right, or the point (called the “dead center”) is off-center, your bit won’t bite into material evenly. That means extra pressure on your drilling machine’s motor, slower drilling, and way more chance of the bit breaking mid-job. We’ve seen brand new $20 drill bits turn into useless twigs because someone tried to grind them freehand without knowing the basics.

Before we start, let’s round up the stuff you don’t need (spoiler: you don’t need a $500 sharpening jig, though they help) and the stuff you actually do. You’ll need a bench grinder (not a dinky handheld one — bench grinders have the right grit for steel bits), a set of safety glasses, a marker, a piece of steel you don’t care about (like an old bolt or scrap angle iron), and a towel to wipe off excess grit. That’s it. No tools you don’t already have, I promise.

Step 1: Mark the Existing Angles First
This is the step most people skip, and it’s why their sharpened bits still don’t work. Grab your marker and color the two primary cutting edges of your drill bit — the sloped sides that do the actual cutting. Why? It lets you see exactly where the grinding wheel is making contact, so you don’t remove too much metal from one side.

Now, what’s the right angle for a drill bit? Most general-purpose bits (for wood, mild steel, plastic) have a 118-degree point angle. If you’re drilling hard metal like stainless steel, bump that up to 135 degrees; for wood, a shallower 90 degrees works better so the bit doesn’t split the grain. If you’re not sure, start with 118 — that’s the sweet spot 90% of our customers use.

Step 2: Set Up Your Grinder Correctly
Grab your bench grinder and make sure the tool rest (the flat piece right next to the wheel) is set about 1/8 of an inch away from the wheel. If it’s too close, you can accidentally grind your fingers; too far, and the bit will wobble. Pro tip from our shop: always wear safety glasses — dust from grinding steel is tiny, sharp, and will get in your eyes before you even notice it’s there. I learned that the hard way after a 5-minute grinding session left me rinsing my eyes out for 10 minutes (not fun).

Step 3: Grind the Primary Cutting Edges
Hold the drill bit at the exact angle you want (118 degrees for most jobs) so the cutting edge is flat against the grinding wheel. Here’s the trick: keep the bit rotating slightly as you grind, so you don’t grind a flat spot on the edge — that’s how you get a clean, consistent bevel. You only need to remove a little metal from the edge, not grind down the whole bit.

Wait — how do you know you’ve got the angle right? Hold the bit up to your eye and line it up with a straight edge, or just compare it to another good drill bit you have. If one side is longer than the other, your drill’s dead center will be off, and the bit will skip every time you try to drill. I’ve seen guys grind one side so much it’s half the size of the other — that’s a $15 mistake right there.

Step 4: Fix the Dead Center
After you’ve got both cutting edges even, you need to grind the small point in the middle. That’s the dead center — if it’s too high or too low, the bit won’t start a hole cleanly. Most drill bits have a small split point (that tiny groove in the middle) to help with this, but if yours is dull, the dead center will be rounded.

To fix it, hold the bit at a slightly steeper angle (around 135 degrees) so you’re grinding the very tip, not the cutting edges. Grind just the very end until you see a tiny, flat spot no bigger than the head of a pin. If you grind too much, you’ll ruin the point. Test this by poking the tip into your scrap steel — it should bite in without wobbling. If it slides around, go back to the grinder for another tiny grind.

Step 5: Remove the Burrs
Once you’re done grinding, your bit will have a tiny, sharp metal burr on the cutting edges. If you don’t get rid of this, the bit will catch on material and break. To do this, hold the bit against the grinding wheel at a 10-degree angle and lightly touch the burr. Don’t grind too much — you just want to smooth the edge, not take off metal. Wipe the bit down with a rag to get rid of the grinding dust, and you’re good to go.

Now, let’s talk about the mistakes most people make that turn a good drill bit into junk. First, grinding too much metal. Drill bits are made of high-speed steel, which is tough, but if you grind too much heat into the bit (by holding it against the wheel too long), it’ll lose its hardness and dull super fast. If the bit gets too hot to hold with your bare hand, you’re overheating it — dip it in water quick to cool it off, and take a break.

Another big one: uneven cutting edges. I’ve seen guys hold the bit with one hand, and the angle changes mid-grind, so one side is 10 degrees steeper than the other. How do you check? Hold the two sides up to each other — if they’re not mirror images, it’s off. The best way we teach at our shop is to use a drill bit sharpening guide. It’s a $15 tool that clamps to your bit and sets the exact angle, so you can’t mess it up. We sell ’em right alongside our drilling machines, and most of our regulars swear by ’em.

What about if you have a lot of drill bits to sharpen? A lot of our customers run construction shops or metal fabrication garages, so they go through bits fast. For that, a drill bit sharpener (the electric kind you plug in) is worth the investment. It’s simple: clamp the bit in, turn it on, and it does all the angle work for you. No guesswork, no uneven edges — perfect for when you’ve got 10 bits to do in 10 minutes.

Now, let’s tie this back to our drilling machines. If you’re using a dull bit, you’re not just wasting bits — you’re putting extra strain on your drilling machine’s motor. We’ve had customers come to us saying their drilling machine was overheating after 20 minutes of use, and it turned out their bits were so dull, the motor was working twice as hard to drill through a 1/4 inch of steel. Sharpening your bits is one of the easiest ways to keep your machine running strong and extend its lifespan.

If you’re still confused, or you’ve tried sharpening and it just doesn’t work, our team is here to help. We’ve got techs on call every weekday who can walk you through it over the phone, no fancy appointments needed. We also sell pre-sharpened drill bits in bulk, so if sharpening isn’t your thing, we’ve got you covered.

At the end of the day, a good drill bit sharpened right will drill holes faster, cleaner, and save you money. We’ve seen it time and time again: a customer picks up a sharpening guide and a couple new bits, and suddenly their drilling machine is working like it did the first day they unboxed it.

If you’re in the market for a new drilling machine, or you’re looking for replacement parts or sharpening tools, reach out to our team — we’re here to help you get the job done right. No pushy sales, just solid advice from people who’ve been in the drilling game for years.

I’ve read so many posts online telling you to “just grind freehand” and it’s “super easy,” but that’s not true for first-timers. Take your time, mark your angles, and test the bit on scrap material before you use it on a job. You’ll save yourself a lot of frustration, and your drill (and your wallet) will thank you.

Just a quick note: if you’re using a cordless drill for small jobs, these tips work too, but we always recommend a bench grinder for heavier use — cordless drills don’t have the same torque to work with dull bits, so sharpening is even more important.

Oh, and one last pro tip: when you’re not using your drill bits, store them in a dry case. Rust is the enemy of drill bits — even a little surface rust will make the edges dull faster, and you’ll be sharpening them way more often.

So that’s the lowdown on sharpening a drill bit. If you have questions, or you’re ready to upgrade your drilling machine, hit up our team. We’re here to make your drilling projects easier, no matter how big or small.

Gantry-type Machining Center References

  1. Metalworking Fundamentals for Education, NIMS (National Institute for Metalworking Skills), 2021
  2. “Drill Bit Geometry and Sharpening Techniques,” Modern Machine Shop, October 2020
  3. High-Speed Steel Tool Manufacturing Guidelines, American Iron and Steel Institute, 2019
  4. Machinery’s Handbook, 31st Edition, Industrial Press, 2020

Weiss Machinery Co., Ltd.
As one of the most professional drilling machine manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy bulk customized drilling machine at competitive price from our factory. Also, quotation is available.
Address: No.8 Chunyang Road, Jiangning Binjiang Development Zone, Jiangning District, Nanjing City, Jiangsu Province, China
E-mail: sales@weiss.com.cn
WebSite: https://www.weisscnc.com/